BegerLite 365

• Topcoat (oil formula)
• Ultra Premium grade  
• Type of color film, smooth and matt
• Application area 26 – 28 sq.m. / gallon / trip

• Can be used in all weather conditions throughout the year, 365 days or 1 year. Can be used on walls with very high or low temperatures.
• breathable paint film Makes the color not blister, does not peel off
• long service life and can clean the film surface by yourself (Self-Cleaning)
• Excellent adhesion on all surfaces (Exellent Adhesion) because it is made from PLIOLITE® resins, which have particles 100 times smaller than particles of 100% acrylic waterborne resin particles, allowing them to penetrate and adhere. embedded in the surface deeper, firmer
• The texture is dense, the cover is excellent, easy to use.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• New plastered surfaces: Make sure the surfaces are dry, clean and free of dust and dirt.
• The surface has cracks: remove bricks and stones around the cracks and expand the cracks appropriately. then fill the cracks With a grooved filler, let it dry and smooth it with sand paper. and clean
• Surface with original color: Remove the original paint that has peeled off. With a scraping trowel or wire brush, if unsure of the condition of the original paint Peel it off with a tool. or Beyer paint remover Then clean thoroughly with high-pressure water jets. and leave to dry completely before painting.
• Moldy surfaces: Remove algae, mold with scraping trowels or wire brushes followed by high-pressure water jets. Then clean the surface too. mold remover Beyer Mold Free M-001

• In case of new cement surfaces or old cement surfaces with normal humidity values (approximately less than 20% humidity), apply foundation as well. Beger Light Primer No. 1999, 1 coat to increase the ability to adhere to the surface. and efficiency in protecting the occurrence of stains from salt
• In case of new cement surfaces or old cement surfaces with higher humidity than normal (humidity is in the range of 20-35% approximately) or a surface with a constant accumulation of moisture. It is also recommended to apply
• Beyerlight Waterroof Primer No. 1012, 1 coat before applying topcoat.

• After applying the primer, allow it to dry for at least 24 hours. 2 coats of Beger Light 365, each coat should be allowed to dry at least 24 hours.
• First coat: should be diluted with Thinner M-91 about 10% for good penetration and adhesion. and make the color last longer
• Second coat : Apply Beger Light 365 without dilution.